# Using Bayesian radiocarbon chronology package Bchron

#### Andrew Parnell

#### 2025-12-12

# Bchron User Guide

## Introduction

Bchron is an R package that enables quick calibration of radiocarbon dates under various calibration curves (including user generated ones); age-depth modelling as per the algorithm of Haslett and Parnell (2008); Relative sea level rate estimation incorporating time uncertainty in polynomial regression models (Parnell and Gehrels 2015); non-parametric phase modelling via Gaussian mixtures as a means to determine the activity of a site (and as an alternative to the Oxcal function SUM; currently unpublished), and reverse calibration of dates from calibrated into un-calibrated years.

You will find Bchron far easier to use if you know some basics on how to use R. I recommend the book by Norman Matloff amazon.co.uk link, or the online courses by Pluralsight

If you find bugs or want to suggest new features please visit the Bchron GitHub issues page.

## Installing Bchron

Bchron will run in Windows, Mac OS X or Linux. To install Bchron you first need to install R. I would also recommend installing Rstudio as a nice desktop environment for using R. Once in R you can type:

    install.packages("Bchron")

at the R command prompt to install Bchron. If you then type:

    library(Bchron)

it will load in all the Bchron functions.

If you want to install the development version of Bchron please visit the Bchron GitHub page. The GitHub version contains a few more features but some of these can be quite untested, and occasionally this version will break when it is in the process of being updated.

## Calibrating radiocarbon dates

Bchron will calibrate single or multiple dates under multiple (even user defined) calibration curves. By default, the intcal20, shcal20 and marine20 calibration curves are included (as are older calibration curves such as intcal13). You can calibrate a single radiocarbon date with, e.g.

    ages1 <- BchronCalibrate(
      ages = 11553,
      ageSds = 230,
      calCurves = "intcal20",
      ids = "Ox-123456"
    )
    summary(ages1)

    ## 95% Highest density regions for Ox-123456
    ## $`0.4%`
    ## [1] 13004 13025
    ##
    ## $`77.9%`
    ## [1] 13059 13874
    ##
    ## $`16.4%`
    ## [1] 13923 14012

    plot(ages1)

This will calibrate the radiocarbon age of 11,553 14C years BP with standard error 230 14C years on the intcal20 calibration curve. The `id` given is optional and only used for summarising and plotting. The summary command then gives the highest density regions of the calibrated date and the plot command produces a simple plot of the density, together with a shaded region for the 95% highest density region.

Bchron can calibrate multiple dates simultaneously by inputting the dates as vectors:

    ages2 <- BchronCalibrate(
      ages = c(3445, 11553, 7456),
      ageSds = c(50, 230, 110),
      calCurves = c("intcal20", "intcal20", "shcal20")
    )
    summary(ages2)
    plot(ages2)

This will calibrate three different 14C ages with the calibration curves as specified in the `calCurves` argument. The `summary` and `plot` commands will produce individual highest density regions and density plots for the three dates.

You can plot individual dates from a calibration of multiple dates by name or number, e.g.

    plot(ages2, date = "Date3")
    plot(ages2, date = 1:2)

If you provide position information (e.g. depths) to the BchronCalibrate function it will create a plot with position on the y-axis, e.g.:

    ages3 <- BchronCalibrate(
      ages = c(3445, 11000),
      ageSds = c(50, 200),
      positions = c(100, 150),
      calCurves = c("intcal20", "normal")
    )
    summary(ages3)

    ## 95% Highest density regions for Date1
    ## $`94.4%`
    ## [1] 3572 3834
    ##
    ##
    ## 95% Highest density regions for Date2
    ## $`94.7%`
    ## [1] 10606 11394

    plot(ages3)

… or change the axes/titles if you want:

    library(ggplot2)
    plot(ages3) +
      labs(
        x = "Age (years BP)",
        y = "Depth (cm)",
        title = "Two dates at different depths"
      )

… or change to BC/AD

    plot(ages3, ageScale = "bc", scaleReverse = FALSE) +
      labs(
        x = "Age (years BC/AD)",
        y = "Depth (cm)",
        title = "Two dates at different depths"
      )

… or add the calibration curve into the plot

    plot(ages1, includeCal = TRUE)

… or add multiple dates into the calibration curve plots

    ages4 <- BchronCalibrate(
      ages = c(3445, 11553, 7456),
      ageSds = c(50, 230, 110),
      calCurves = rep("intcal20", 3)
    )
    plot(ages4, includeCal = TRUE, fillCol = "orange")

## Credible intervals

If, alternatively, you want a credible interval (i.e. a single contiguous range) rather than an HDR, you could use the `sampleAges` function:

    # First create age samples for each date
    age_samples <- sampleAges(ages3)
    # Now summarise them with quantile - this gives a 95% credible interval
    apply(age_samples, 2, quantile, prob = c(0.025, 0.975))

    ##          Date1 Date2
    ## 2.5%  3571.000 10602
    ## 97.5% 3836.025 11398

The `sampleAges` function introduces some uncertainty as it is a simple random sample. This means that repeatedly running it will give you slightly different results. If you require precision at a yearly level, you might want to increase the `n_samp` argument though will slow the function down a little.

If you wanted to find each date’s median age (though this is often an inappropriate summary and should be treated with caution), use:

    apply(age_samples, 2, quantile, prob = c(0.5))

    ## Date1 Date2
    ##  3703 11001

The calibration code is very fast. On a standard PC you should have no trouble calibrating thousands of dates simultaneously without a noticeably long wait.

## Comparing ages

If you want to compare two dates, a good method is to look at the posterior difference between them. Because Bchron provides all the information about the dates through the `sample_ages` function, this difference can be calculated in just a few lines of code.

    age_diff <- age_samples[, 2] - age_samples[, 1]
    qplot(age_diff,
      geom = "histogram", bins = 30,
      main = "Age difference between 3445+/-50 and 11553+/-230",
      ylab = "Frequency", xlab = "Age difference"
    )

## Running the Bchronology age-depth model

The Bchronology function fits the age-depth model outlined by Haslett and Parnell (2008). An illustrative data set from Glendalough is provided with the package, containing 5 radiocarbon dates and a known age for the top of the core. It can be called in via:

    data(Glendalough)
    print(Glendalough)

    ##            id  ages ageSds position thickness calCurves
    ## 1       Top-1     0      1        0         0    normal
    ## 2 Beta-122061  2310     60      426         4  intcal20
    ## 3 Beta-100901  9150     50     1166         4  intcal20
    ## 4 Beta-100900  9810     60     1204         4  intcal20
    ## 5 Beta-100899 10940     60     1383         2  intcal20
    ## 6 Beta-100897 11550     60     1433         2  intcal20

The top date is from the present and has the calibration curve ‘normal’ as it is not a 14C date. This core can be run through Bchron via:

    GlenOut <- with(
      Glendalough,
      Bchronology(
        ages = ages,
        ageSds = ageSds,
        calCurves = calCurves,
        positions = position,
        positionThicknesses = thickness,
        ids = id,
        predictPositions = seq(0, 1500, by = 10)
      )
    )

There are other arguments you can supply to Bchronology, including the date the core was extracted, the outlier probabilities for each individual date, and the number of iterations for which to run the algorithm. For more details see:

    help(Bchronology)

Once run, the summary commands will show various output:

    summary(GlenOut)

    summary(GlenOut, type = "convergence")

    ## Convergence check (watch for too many small p-values):
    ##             p-value
    ## RateMean    0.00000
    ## RateVar     0.00000
    ## Beta-100901 0.08975
    ## Beta-100897 0.10267
    ## Outlier 3   0.16419
    ## Outlier 4   0.22395
    ## Beta-100899 0.22892
    ## Outlier 5   0.25091
    ## Top-1       0.25266
    ## Beta-100900 0.27339
    ## Outlier 2   0.28299
    ## Outlier 6   0.28299
    ## Outlier 1   0.36087
    ## Beta-122061 0.43958

    summary(GlenOut, type = "outliers")

    ## Posterior outlier probability by date:
    ##         Date OutlierProb
    ##        Top-1       0.008
    ##  Beta-122061       0.006
    ##  Beta-100901       0.017
    ##  Beta-100900       0.015
    ##  Beta-100899       0.011
    ##  Beta-100897       0.005

The first summary command produces ages for each position supplied in the `predictPositions` argument above (output not shown as it’s too long). The second provides convergence diagnostics. The third gives outlier probabilities. The `plot` command will produce an age-position plot:

    plot(GlenOut)

Finally, the `predict` command will produce predicted ages for a newly specified set of positions with optional thicknesses:

    predictAges <- predict(GlenOut,
      newPositions = c(150, 725, 1500),
      newPositionThicknesses = c(5, 0, 20)
    )
    predictAges <- predict(GlenOut,
      newPositions = seq(0, 1500, by = 10)
    )

To run this model on a data set of your own, you will need to load in your data set via, e.g.

    mydata = read.table(file='path/to/file.txt',header=TRUE)
    run = Bchronology(ages=mydata[,1],ageSds=mydata[,2], ...

### Obtaining sedimentation and accumulation rates

The summary function used above also allows for calculation of sedimentation and accumulation rates. Here is an example of calculating and plotting the accumulation rate for the `GlenOut` object created above:

    acc_rate <- summary(GlenOut,
      type = "acc_rate",
      probs = c(0.25, 0.5, 0.75)
    )

    acc_rate_2 <- acc_rate %>%
      gather(
        key = Percentile,
        value = value,
        -age_grid
      )
    ggplot(acc_rate_2, aes(
      x = age_grid,
      y = value,
      colour = Percentile
    )) +
      scale_colour_brewer(palette = 1) +
      geom_line() +
      theme_bw() +
      scale_x_reverse() +
      labs(
        y = "cm per year",
        x = "Age (cal years BP)"
      )

Clearly these accumulation rates are very uncertain, which is unsurprising given the paucity of dates.

To calculate sedimentation rates, you need to either make sure that the `predictPositions` argument in the `Bchronology` call above is given with unit differences (e.g. `predictPositions=seq(0,1500,by=1)`) or set the argument `useExisting=FALSE` in the command below:

    sed_rate <- summary(GlenOut,
      type = "sed_rate", useExisting = FALSE,
      probs = c(0.25, 0.5, 0.75)
    )

This will be quite slow as it needs to predict ages on a regular unit depth grid. However, the plots can be created in the same way:

    sed_rate_2 <- sed_rate %>%
      gather(
        key = Percentile,
        value = value,
        -position_grid
      )
    ggplot(sed_rate_2, aes(
      x = position_grid,
      y = value,
      colour = Percentile
    )) +
      scale_colour_brewer(palette = 1) +
      geom_line() +
      theme_bw() +
      scale_x_reverse() +
      labs(
        y = "Years per cm",
        x = "Depth (cm)"
      )

You could then for example save this to a csv file with, e.g. `write.csv(sed_rate, file = 'Glendalough_sed_rates.csv', quote=FALSE, row.names = FALSE)`

## Identifying influential dates and positions

Bchron contains two functions which can help with future dating strategies. They are:

1. Identifying the position at which the maximum age variance occurs. This is useful if you wanted to pick the one next position to date
2. Identifying which date is the most influential on the chronology. This is useful if you are concerned that one date might be leading the chronology astray.

Identifying the position of maximum age variance can be created with the `summary` command:

    summary(GlenOut, type = "max_var")

    ## Top 3 positions with maximum age variance are:
    ## 830 800 810

You can control the number of positions reported with `numPos`. For example you could now add a line to mark the most variably layer to the plot with:

    max_var <- summary(GlenOut, type = "max_var", numPos = 1)

    ## Position with maximum age variance is:
    ## 830

    plot(GlenOut) +
      labs(
        title = "Glendalough",
        x = "Age (cal years BP)",
        y = "Depth (cm)"
      ) +
      geom_hline(yintercept = max_var)

Finding the date which has maximum influence in the core is a more computationally intensive procedure and involves running the Bchron model repeatedly, leaving each date out in turn, and quantifying the effect on the chronology of removing each date. The function is called `dateInfluence`. Note that you provide this function with a full run of the Bchron model.

To find the influence, say, of date `Beta-100901` as the median date shift in years when is removed, we would run:

    dateInfluence(GlenOut,
      whichDate = "Beta-100901",
      measure = "absMedianDiff"
    )

Alternatively, to find the influence of all the dates in terms of the median shift we could use:

    dateInfluence(GlenOut,
      whichDate = "all",
      measure = "absMedianDiff"
    )

A more complete measure of influence is the Kullback-Leibler (KL) divergence which takes account of the change in the full probability distribution rather than just looking at mean or median age differences when that particular date is left out. The KL divergence version could then be run using:

    dateInfluence(GlenOut,
      whichDate = "all",
      measure = "KL"
    )

The interpretation here is relative. The dates with the largest KL divergence values have the most influence on the chronology in the core.

## Running RSL rate estimation

The function `BchronRSL` will produce estimated relative sea level rates from a regression model taking into account the uncertainties in age provided by a `Bchronology` run as above. Two example data sets are provided:

    data(TestChronData)
    data(TestRSLData)

These can be run through Bchronology and BchronRSL via:

    RSLchron <- with(
      TestChronData,
      Bchronology(
        ages = ages,
        ageSds = ageSds,
        positions = position,
        positionThicknesses = thickness,
        ids = id,
        calCurves = calCurves,
        predictPositions = TestRSLData$Depth
      )
    )
    RSLrun <- with(
      TestRSLData,
      BchronRSL(RSLchron,
        RSLmean = RSL,
        RSLsd = Sigma,
        degree = 3
      )
    )

The `Bchronology` run is as described in the section above. The `BChronRSL` run takes this object, an estimate of the RSL means and standard deviations, and a value of degree (here 3 indicating cubic regression). They can then be summarised and plotted via:

    summary(RSLrun, type = "RSL", age_grid = seq(0, 2000, by = 250))
    plot(RSLrun, type = "RSL") + ggtitle("Relative sea level plot")
    plot(RSLrun, type = "rate") + ggtitle("Rate of RSL change") +
      ylab("Rate (mm per year)")

See the help files for more options, including outputting parameter values, and plots of acceleration of RSL itself.

## Running non-parametric phase estimation

Bchron contains two functions for running non-parametric phase models for estimating activity level in a site/region. The first, BchronDensity fits a full Bayesian Gaussian mixture model to the radiocarbon dates whilst the second `BchronDensityFast` fits an approximate version which will run on much larger data sets. An example run is

    data(Sluggan)
    SlugDens <- BchronDensity(
      ages = Sluggan$ages,
      ageSds = Sluggan$ageSds,
      calCurves = Sluggan$calCurves
    )

You can then output the possible start/end dates of phases:

    summary(SlugDens, prob = 0.95)

The probability argument will specify the sensitivity of the algorithm to finding phases. Lower values of `prob` will lead to more discovered phases.

You can plot the density with:

    plot(SlugDens, xlab = "Age (cal years BP)", xaxp = c(0, 16000, 16))

Phases will be shown with a thick black red line. These can be turned off by setting the argument `plotPhase=FALSE` whilst the sensitivity can be changed with `phaseProb`.

`BchronDensityFast` is identical except for the function call:

    SlugDensFast <- BchronDensityFast(
      ages = Sluggan$ages,
      ageSds = Sluggan$ageSds,
      calCurves = Sluggan$calCurves
    )

The `BchronDensityFast` function outputs the age grid and density by default so requires no extra arguments to store it.

## Including user-defined calibration curves

Bchron allows for user-defined calibration curves to be created through the function `createCalCurve`. If inputs to this function are:

- The `name` of the calibration curve (e.g. intcal20)
- The calibrated/calendar ages for the new calibration curve
- The uncalibrated (e.g. 14C) ages for the new calibration curve
- (Optionally) the 1-sigma error for the calibration curve in uncalibrated years. If not included the error is assumed to be zero
- (Optionally) The path to where the resulting file will be stored

Once run, the calibration curve needs to be moved from the chosen path (by default the working directory) to the location of the other calibration curves. This is by default `system.file('data',package='Bchron')`. The resulting calibration curve can be used for all future runs until the package is deleted or re-installed. The calibration curve can be used by simply calling it in any other Bchron function using the supplied name. Note that no name checking is done, so it is possible to over-write the pre-defined calibration curves if the user is not careful.

We now consider an example of loading in and creating the IntCal09 calibration curve:

    # Load in the calibration curve with:
    intcal09 <- read.table(system.file("extdata/intcal09.14c",
      package = "Bchron"
    ), sep = ",")

    # Run createCalCurve
    createCalCurve(
      name = "intcal09", calAges = intcal09[, 1],
      uncalAges = intcal09[, 2], oneSigma = intcal09[, 3]
    )

The new calibration curve now needs to be moved to the Bchron package directory. You can do this with the following code:

    file.copy("intcal09.rda", system.file("data", package = "Bchron"))

It can then be used via its name. For example, we can now compare the calibration of a date under the intcal09 curve with that of intcal20:

    age_09 <- BchronCalibrate(
      age = 15500, ageSds = 150, calCurves = "intcal09",
      ids = "IntCal09"
    )
    age_20 <- BchronCalibrate(
      age = 15500, ageSds = 150, calCurves = "intcal20",
      ids = "Intcal20"
    )
    library(ggplot2)
    plot(age_09) +
      geom_line(
        data = as.data.frame(age_20$Intcal20),
        aes(x = ageGrid, y = densities), col = "red"
      ) +
      ggtitle("Intcal09 vs Intcal20")

## Calibrating marine and other offset age ranges

Periodically people want to calibrate dates which have an age offset and an offset error. This is very simple in Bchron and requires no additional Bchron commands. So for example, if you had a date of 3000 14C years with 1-sigma error of 50 14C years, but you want to incorporate a reservoir correction with 80 14C years and a 1-sigma error of 30 14C years, then you can just calibrate 2920 years with a radiocarbon error of sqrt(50^2 + 30^2) = 58.3 years. In Bchron this becomes:

    age_rc <- BchronCalibrate(
      age = 3000 - 80,
      ageSds = sqrt(50^2 + 30^2),
      calCurves = "marine20",
      ids = "Res_corr"
    )
    summary(age_rc)

    ## 95% Highest density regions for Res_corr
    ## $`94.6%`
    ## [1] 2332 2705

These offset adjustments can be used in a `Bchronology` type run by storing the offsets and their standard deviations in a vector. So a call to `Bchronology` might become:

    myChron <- with(
      myDataSet,
      Bchronology(
        ages = ages + offsets,
        ageSds = sqrt(ageSds + offsetSds),
        calCurves = calCurves,
        positions = positions,
        positionThicknesses = thicknesses,
        ids = ids
      )
    )

## Uncalibrating dates

Sometimes it is useful to turn a calendar age estimate into an uncalibrated age. This might be for simulation or model checking purposes. ‘Un-calibrating’ dates can be implemented in Bchron using the `unCalibrate` function. There are two versions, one where you have a single age and just want to get a quick look up of the 14C age, and another where you have the full distribution of the calibrated age and want to estimate both the 14C age and its associated error.

The simple version can be run with, e.g.:

    unCal1 <- unCalibrate(2350, type = "ages")

    print(unCal1)

    ## [1] 2352

The above un-calibrates the age 2350 BP to the age 2346 14C years BP on the intcal20 calibration curve. A more advanced version would be:

    unCal2 <- unCalibrate(
      calAge = c(2350, 4750, 11440),
      type = "ages",
      calCurve = "intcal20"
    )

    print(unCal2)

    ## [1]  2352  4176 10021

A fun experiment can then be run to see what the distribution of 14C ages would look like for an even distribution of calendar ages:

    ageRange <- seq(8000, 9000, by = 5)
    c14Ages <- unCalibrate(ageRange,
      type = "ages"
    )
    load(system.file("data/intcal20.rda", package = "Bchron"))
    ggplot(intcal20, aes(x = V1, y = V2)) +
      geom_line() +
      theme_bw() +
      scale_x_continuous(limits = range(ageRange)) +
      scale_y_continuous(limits = range(c14Ages)) +
      geom_rug(
        data = data.frame(c14Ages), aes(y = c14Ages),
        sides = "l", inherit.aes = F
      ) +
      geom_rug(
        data = data.frame(ageRange), aes(x = ageRange),
        sides = "b", inherit.aes = F
      ) +
      labs(x = "Calendar years BP", y = "14C years BP")

Unsurprisingly the places where the calibration curve is flat (or reverses) leads to ‘clumps’ of calendar ages.

The more complicated version is run by providing it with a (preferably large) sample of ages which form a calibrated date. Such a set is created with Bchron via `sampleAges`, e.g.:

    calAge <- BchronCalibrate(
      ages = 11255,
      ageSds = 25,
      calCurves = "intcal20"
    )
    calSampleAges <- sampleAges(calAge)

We can now uncalibrate such a set of samples

    unCal <- unCalibrate(calSampleAges,
      type = "samples"
    )

    print(unCal)

    ## $mean
    ## [1] 11246
    ##
    ## $sd
    ## [1] 27

This will provide a single best estimate of the mean and standard deviation of the uncalibrated (here 14C) date.

# Miscellaneous other queries

## Customising plots

We can use standard `ggplot2` commands to customise some of the plots. For example, suppose we created the standard Glendalough chronology:

    data(Glendalough)
    GlenOut <- with(
      Glendalough,
      Bchronology(
        ages = ages,
        ageSds = ageSds,
        calCurves = calCurves,
        positions = position,
        positionThicknesses = thickness,
        ids = id,
        predictPositions = seq(0, 1500, by = 10)
      )
    )

And suppose we want to plot the data with customised axis labels and a title:

    library(ggplot2)
    plot(GlenOut) +
      labs(
        title = "Glendalough",
        x = "Age (cal years BP)",
        y = "Depth (cm)"
      )

Now suppose we want to plot the chronology but add in the 14C date \(7000 \pm 40\) at depth 600cm. First we calibrated that date

    new_cal <- BchronCalibrate(
      ages = 7000,
      ageSds = 40,
      calCurve = "intcal20"
    )

Finally we create the plot and add the date as a new layer (with a new colour too):

    library(ggridges)
    plot(GlenOut) +
      geom_ridgeline(
        data = as.data.frame(new_cal$Date1),
        aes(
          x = ageGrid,
          y = 600,
          height = densities * 10000, # Note the 10000 came from trial and error
          group = "New date",
        ),
        fill = "grey",
        colour = "black"
      ) +
      annotate("text", x = 9000, y = 570, label = "New date")

### Adding a second chronology

Suppose we want to over-plot a second chronology where we had removed one of the dates. First create the second chronology you want to produce:

    GlenOut2 <- with(
      Glendalough[-2,],
      Bchronology(
        ages = ages,
        ageSds = ageSds,
        calCurves = calCurves,
        positions = position,
        positionThicknesses = thickness,
        ids = id,
        predictPositions = seq(0, 1500, by = 10)
      )
    )

Now create a new data frame with the ranges of the new chronology

    alpha <- 0.95
    chronRange <- data.frame(
          chronLow = apply(GlenOut2$thetaPredict, 2, "quantile", probs = (1 - alpha) / 2),
          chronMed = apply(GlenOut2$thetaPredict, 2, "quantile", probs = 0.5),
          chronHigh = apply(GlenOut2$thetaPredict, 2, "quantile", probs = 1 - (1 - alpha) / 2),
          positions = GlenOut2$predictPositions
        )

Next create a data frame that Bchron can use to plot the chronology. The clever trick here is to put the ages on a grid and approximate the uncertainty in the position (or depth) direction using linear interpolation.

    ageGrid <- with(chronRange, seq(min(chronLow), max(chronHigh),
          length = nrow(chronRange)
        ))
    chronRangeSwap <- data.frame(
          Age = ageGrid,
          positionLow = with(chronRange, approx(chronLow, positions,
            xout = ageGrid,
            rule = 2
          )$y),
          Position = with(chronRange, approx(chronMed, positions,
            xout = ageGrid,
            rule = 2
          )$y),
          positionHigh = with(chronRange, approx(chronHigh, positions,
            xout = ageGrid,
            rule = 2
          )$y),
          Date = "Bchron",
          densities = NA,
          height = NA
        )

And finally add into the plot:

    plot(GlenOut, dateLabels = FALSE, chronTransparency = 0.3) +
      geom_ribbon(
            data = chronRangeSwap,
            aes(
              x = Age,
              ymin = positionLow,
              ymax = positionHigh
            ),
            colour = "red",
            fill = "red",
            alpha = 0.3
          )

## References

For a description of the kind of things that Bchron can do:
Parnell, A. C., Haslett, J., Allen, J. R. M., Buck, C. E., & Huntley, B. (2008). A flexible approach to assessing synchroneity of past events using Bayesian reconstructions of sedimentation history. Quaternary Science Reviews, 27(19-20), 1872–1885.

For the maths behind Bchron:
Haslett, J., & Parnell, A. (2008). A simple monotone process with application to radiocarbon-dated depth chronologies. Journal of the Royal Statistical Society: Series C (Applied Statistics), 57(4), 399–418.

For a review of chronology models:
Parnell, A. C., Buck, C. E., & Doan, T. K. (2011). A review of statistical chronology models for high-resolution, proxy-based Holocene palaeoenvironmental reconstruction. Quaternary Science Reviews, 30(21-22), 2948–2960.

For relative sea level rate estimation:
Parnell, A. C., & Gehrels, W. R. (2015). Using chronological models in late Holocene sea level reconstructions from salt marsh sediments. In: I. Shennan, B.P. Horton, and A.J. Long (eds). Handbook of Sea Level Research. Chichester: Wiley.