Metadata-Version: 1.0
Name: plone.recipe.zope2instance
Version: 4.0.5
Summary: ZC Buildout recipe for installing a Zope 2 instance
Home-page: http://pypi.python.org/pypi/plone.recipe.zope2instance
Author: Hanno Schlichting
Author-email: hannosch@plone.org
License: ZPL 2.1
Description: Introduction
        ============
        
        This recipe creates and configures a Zope 2 instance in parts. It also
        installs a control script, which is like zopectl, in the bin/ directory.
        The name of the control script is the the name of the part in buildout.
        
        You can use it with a part like this::
        
          [instance]
          recipe = plone.recipe.zope2instance
          user = admin:admin
          http-address = 8080
          eggs = ${buildout:eggs} my.package
          products = ${buildout:directory}/products
          zcml = my.package
        
        .. ATTENTION::
           This release is targeted at Zope 2.12+ and Python 2.6. If you are using
           this recipe with earlier versions of Zope or Python, you should use one
           of the releases from the 3.x series.
        
        Options
        -------
        
        zope-conf
          A relative or absolute path to a zope.conf file. If this is not given, a
          zope.conf will be generated based on the the options below.
        
        The following options all affect the generated zope.conf:
        
        products
          A list of paths where Zope 2 products are installed. The first path takes
          precedence in case the same product is found in more than one directory.
        
        site-zcml
          If you want a custom site.zcml file, put its content here. If this option is
          used the zcml and zcml-additional options are ignored.
        
        zcml
          Install ZCML slugs for the packages listed, separated by whitespace. You
          can specify the type of slug by appending '-' and the type of slug you want
          to create.  The valid types are configure, overrides and meta. Some
          examples: my.package-overrides my.package-meta
        
        zcml-additional
          Extra ZCML statements that should be included in the generated site.zcml
          file.
        
        extra-paths
          A list of paths where additional python packages are installed. The paths
          are searched in the given order after all egg and products paths.
        
        default-zpublisher-encoding
          This controls what character set is used to encode unicode data that reaches
          ZPublisher without any other specified encoding. This defaults to 'utf-8'.
        
        debug-mode
          Set to 'on' to turn on debug mode in Zope. Defaults to 'off'.
        
        verbose-security
          Set to 'on' to turn on verbose security (and switch to the Python security
          implementation). Defaults to 'off' (and the C security implementation).
        
        effective-user
          The name of the effective user for the Zope process. Defaults to not setting
          an effective user.
        
        ip-address
          The default IP address on which Zope's various server protocol
          implementations will listen for requests. If this is unset, Zope will listen
          on all IP addresses supported by the machine. This directive can be
          overridden on a per-server basis in the servers section. Defaults to not
          setting an ip-address.
        
        port-base
          Offset applied to the port numbers used for ZServer configurations. For
          example, if the http-server port is 8080 and the port-base is 1000, the HTTP
          server will listen on port 9080. This makes it easy to change the complete
          set of ports used by a Zope server process. Zope defaults to 0.
        
        http-address
          Give a port for the HTTP server. Defaults to 8080.
        
        http-fast-listen
          Set to off to defer opening of the HTTP socket until the end of the Zope
          startup phase. Defaults to on. Note: This option requires Zope >= 2.11.
        
        ftp-address
          Give a port for the FTP server. This enables the FTP server.
        
        webdav-address
          Give a port for the WebDAV server.  This enables the WebDAV server
        
        webdav-force-connection-close
          Valid options are off and on. Defaults to off
        
        icp-address
          Give a port for the ICP server. This enables the ICP server.
        
        client-home
          Sets the clienthome for the generated instance.
          Defaults to ${buildout:directory}/var/<name of the section>.
        
        var
          Used to configure the base directory for all things going into var.
          Defaults to ${buildout:directory}/var.
        
        event-log
          The filename of the event log. Defaults to var/log/${partname}.log
        
        event-log-custom
          A custom section for the eventlog, to be able to use another
          event logger than `logfile`
        
        event-log-level
          Set the level of the console output for the event log. Level may be any of
          CRITICAL, ERROR, WARN, INFO, DEBUG, or ALL. Defaults to INFO.
        
        mailinglogger
          A mailinglogger section added into the event log. Example snippet::
        
            <mailing-logger>
              level error
              flood-level 10
              smtp-server smtp.mydomain.com
              from logger@mydomain.com
              to errors@mydomain.com
              subject [My domain error] [%(hostname)s] %(line)s
            </mailing-logger>
        
        z2-log
          The filename for the Z2 access log. Defaults to var/log/${partname}-Z2.log.
        
        z2-log-level
          Set the log level for the access log. Level may be any of CRITICAL, ERROR,
          WARN, INFO, DEBUG, or ALL. Defaults to WARN.
        
        access-log-custom
          Like `event-log-custom`, a custom section for the access logger, to be able
          to use another event logger than `logfile`.
        
        file-storage
          The filename where the ZODB data file will be stored.
          Defaults to var/filestorage/Data.fs.
        
        demo-storage
          If 'on' it enables the demostorage. It is not compatible with blob-storage
          and rel-storage.
        
        blob-storage
          The name of the directory where the ZODB blob data will be stored.
        
        rel-storage
          Allows to set a RelStorage instead of a FileStorage.
        
          Contains settings separated by newlines, with these values:
        
          - type: any database type supported (postgresql, oracle, mysql)
          - RelStorage specific keys, like `cache-servers` and `poll-interval`
          - all other keys are passed on to the database-specific RelStorage adapter.
        
          Example::
        
            rel-storage =
              type oracle
              dsn (DESCRIPTION=(ADDRESS=(HOST=s01))(CONNECT_DATA=(SERVICE_NAME=d01)))
              user tarek
              password secret
        
        zeo-client
          Set to 'on' to make this instance a ZEO client. In this case, setting the
          zeo-address option is required, and the file-storage option has no effect.
          To set up a ZEO server, you can use the plone.recipe.zope2zeoserver recipe.
          Defaults to 'off'.
        
        shared-blob
          If 'zeo-client' is set to 'on' and 'blob-storage' is set to a directory that
          is shared between this instance and the ZEO server (as configured by the
          'blob-dir' setting on zeo.conf, then setting 'shared-blob' to 'on' causes
          this instance not to stream the blob file through the ZEO connection, but
          just to send the information of the file location to the ZEO server.
        
        zeo-address
          Set the address of the ZEO server. Defaults to 8100.
        
        zeo-client-name
          Set the name of the ZEO client. Defaults to the name of the part. If a false
          value is provided no zeo-client-name will be set.
        
        zeo-client-cache-size
          Set the size of the ZEO client cache. Defaults to '30MB'.
        
        zeo-client-client
          Set the persistent cache name that is used to construct the cache
          filenames. Persistent cache files are disabled by default.
        
        zeo-storage
          Set the storage number of the ZEO storage. Defaults to '1'.
        
        zeo-var
          Used in the zeo storage snippets to configure the zeo var folder.
          Defaults to $INSTANCE_HOME/var.
        
        zeo-username
          Enable ZEO authentication and use the given username when accessing the
          ZEO server. It is obligatory to also specify a zeo-password.
        
        zeo-password
          Password to use when connecting to a ZEO server with authentication
          enabled.
        
        zeo-realm
          Authentication realm to use when authentication with a ZEO server. Defaults
          to 'ZEO'.
        
        zodb-cache-size
          Set the ZODB cache size, i.e. the number of objects which the ZODB cache
          will try to hold. Defaults to 5000.
        
        zodb-cache-size-bytes
          Set the ZODB cache sizes in bytes. Requires ZODB 3.9 or later.
        
        zserver-threads
          Specify the number of threads that Zope's ZServer web server will use to
          service requests. You shouldn't change this unless you know what you are
          doing. The recipes default is 2.
        
        python-check-interval
          An integer telling the Python interpreter to check for asynchronous events
          every number of instructions. This affects how often thread switches occur.
        
        enable-product-installation
          Enable the persistent product registry by setting this to ``on``. By default
          the registry is turned ``off``.
        
        zodb-temporary-storage
          If given Zope's default temporary storage definition will be replaced by
          the lines of this parameter.
        
        environment-vars
          Define arbitrary key-value pairs for use as environment variables during
          Zope's run cycle.
        
          Example::
        
            environment-vars =
              TZ US/Eastern
              TMP /var/tmp
              DISABLE_PTS True
        
        zope-conf-additional
          Give additional lines to zope.conf. Make sure you indent any lines after
          the one with the parameter.
        
          Example::
        
            zope-conf-additional =
              locale fr_FR
              http-realm Slipknot
        
        relative-paths
          Set this to `true` to make the generated scripts use relative
          paths. You can also enable this in the `[buildout]` section.
        
        Additional control script commands
        ----------------------------------
        
        Third-party packages may add additional commands to the control script by
        installing a 'plone.recipe.zope2instance.ctl' entry point. For example,
        an egg called mypackage could include a module called mypackage with the
        following custom command::
        
            def foo(self, *args)
                """Help message here"""
                print 'foo'
        
        It would then install the foo method as a command for the control script using
        the following entry point configuration in setup.py::
        
            entry_points="""
            [plone.recipe.zope2instance.ctl]
            foo = mypackage:foo
            """
        
        This would allow invoking the foo method by running `bin/instance foo`
        (assuming the instance control script was installed by a buildout part
        called `instance`.)  The entry point is invoked with the following
        parameters:
        
          self
            An instance of plone.recipe.zope2instance.ctl.AdjustedZopeCmd.
          args
            Any additional arguments that were passed on the command line.
        
        Reporting bugs or asking questions
        ----------------------------------
        
        We have a shared bugtracker and help desk on Launchpad:
        https://bugs.launchpad.net/collective.buildout/
        
        Changelog
        =========
        
        4.0.5 - 2010-10-22
        ------------------
        
        - Added support for specifying the new RelStorage options shared-blob-dir,
          blob-cache-size, blob-cache-size-check, and blob-chunk-size.
          [hathawsh]
        
        4.0.4 - 2010-09-09
        ------------------
        
        - Add friendly error message if non-admin tries
          "instance install|start|restart|stop|remove".
          [kleist]
        
        - Exit with the return code of the executed do_* method. This closes #10906
          (clicking "Restart" in ZMI control panel caused shutdown).
          [kleist]
        
        - Implemented the "restart" command for "bin/instance.exe".
          [kleist]
        
        4.0.3 - 2010-08-20
        ------------------
        
        - Setuptools / Subversion ignores empty directories and doesn't include them
          into the source distribution. Added readme files to the `bin` and `var`
          directories inside the skeleton. This lets persistent ZEO caches work again,
          which want to put their files into the `var` directory.
          [hannosch]
        
        4.0.2 - 2010-08-04
        ------------------
        
        - Rewritten major parts of commands specific for the Windows Service, inspired
          by "collective.buildout.cluster.base.ClusterBase" as used by the Windows
          installer. Closes http://dev.plone.org/plone/ticket/10860.
          [kleist]
        
        4.0.1 - 2010-07-30
        ------------------
        
        - Use pid file to check for running application, instead of service status.
          [sidnei]
        
        4.0.0 - 2010-07-21
        ------------------
        
        - "console" mode on Windows no longer returns immediately, thus makes it
          usable by the Windows Service.
          [kleist]
        
        - Made tests compatible with Windows.
          [hannosch]
        
        - Added support for specifying new RelStorage options cache-local-mb,
          cache-delta-size-limit, commit-lock-timeout and commit-lock-id.
          [hannosch]
        
        4.0b2 - 2010-06-23
        ------------------
        
        - Added a new dependency on ``mailinglogger`` and expose it as a convenient
          new option.
          [hannosch]
        
        - Removed testing dependency on ``zope.testing`` and refactored test setup.
          [hannosch]
        
        4.0b1 - 2010-04-04
        ------------------
        
        - The recipe could sometimes fail to build twice if no zcml option was given.
          This closes http://dev.plone.org/plone/ticket/10296.
          [hannosch]
        
        4.0a4 - 2010-02-04
        ------------------
        
        - Removed commented out options from the http-server section.
          [hannosch]
        
        - Added new ``enable-product-installation`` option and let it default to off.
          [hannosch]
        
        4.0a3 - 2010-01-24
        ------------------
        
        - Tried to restore the Windows service functionality, getting closer but not
          there yet all the way.
          [hannosch]
        
        - Use the same quoting approach for the console as for fg command on Windows.
          [hannosch]
        
        - Don't call zopectl.quote_command(), since the added outer double quotes caused
          subprocess.call() to fail with "WindowsError: [Error 87] The parameter is
          incorrect". Instead, hand roll the quoting (save outer quotes).
          [kleist]
        
        - Un-hardcoded ':' as path separator, caused "ImportError: No module named
          Zope2.Startup" on Windows. See http://dev.plone.org/plone/ticket/9991.
          [kleist]
        
        - Removed the import directory from the skeleton. You can place import files
          into the import directory in the client home in new Zope 2 versions.
          [hannosch, davisagli]
        
        - Make it possible to omit the user option, in which case buildout will ask
          for a user and password, when a new instance is created.
          [hannosch]
        
        - Use our own make instance script and skeletons, only providing what we
          really need anymore.
          [hannosch]
        
        - Merge the two ZopeCmd classes into one. We don't rely or generate the runzope
          script or anything inside parts/instance/bin anymore.
          [hannosch]
        
        - By default create a blob-storage in ``var/blobstorage``.
          [hannosch]
        
        - Removed the ``no-shell`` option and made it the default for running the
          process. This also removes the need for the ``runzope`` script.
          [hannosch]
        
        - This version can no longer be used to install a non-eggified Zope2. The
          ``zope2-location`` option was removed.
          [hannosch]
        
        4.0a2 - 2009-12-02
        ------------------
        
        - Make it possible for third-party packages to add additional commands to the
          control script by supplying a 'plone.recipe.zope2instance.ctl' entry point.
          [davisagli]
        
        4.0a1 - 2009-11-14
        ------------------
        
        - Removed the test command support from the control script which lets us
          remove quite a bit of hackery. Added a note about using ``bin/test`` instead.
          [hannosch]
        
        - Added an explicit `python-check-interval` option and change its default to
          `1000` instead of Python's own default of `100`.
          [hannosch]
        
        - Changed default `zserver-threads` to two instead of four.
          [hannosch]
        
        - Changed client connection cache defaults. We specify a cache size of 10000
          instead of 5000. Also changed ZEO client cache to 128MB instead of 30MB.
          [hannosch]
        
        - If we are used in an environment with Zope2 as an egg, we make sure to
          install the mkzopeinstance and runzope scripts we depend on ourselves.
          This is done even if they already exist, since the eggs may have changed.
          [hannosch, davisagli]
        
        - Added Zope2 egg to the list of dependencies of this recipe. This can cause
          trouble for Zope versions before Zope 2.12 or Plone before 4.0.
          [hannosch]
        
        - Added the cache-prefix option for RelStorage.
        
        3.6 (2009-10-11)
        ----------------
        
        - Expanded the RelStorage options, including keep-history and replica-conf.
          [hathawsh]
        
        3.5 (2009-09-05)
        ----------------
        
        - Added support for relative-paths in the script generation.
          [jvloothuis]
        
        - When `zope-conf` is set the config file will be directly loaded from that
          location (it previously created a stub zope.conf which included it).
          [jvloothuis]
        
        - Added an option to avoid using the normal shell scripts for starting Zope.
          This makes it possible to avoid the hard-coded paths in these scripts.
          [jvloothuis]
        
        - Allow the blob-dir parameter in RelStorage configurations.
          [hathawsh]
        
        3.4 (2009-08-12)
        ----------------
        
        - Support in line with fix for LP#407916.
          [gotcha]
        
        - Changed the 'mkzopeinstance' call respect the 'bin-directory' option.
          [esteele]
        
        - Removed the `zope2-egg` option and the simple startup script from the recipe.
          We assume that we have an egg distribution if `zope2-location` is not set.
          [hannosch]
        
        - Merged the `davisagli-eggified-zope` branch into the trunk.
          [hannosch]
        
        - Add a new icp-address option. This is useful for environments where
          e.g. squid is used to front a Zope/ZEO cluster. See
          http://www.zope.org/Members/htrd/icp/intro
          [neaj]
        
        3.3 - 2009-07-07
        ----------------
        
        - Add handling for RelStorage options.
          [elro]
        
        - Reinstall scripts on update which appears to be good recipe practice.
          [stefan]
        
        3.2 - 2009-04-02
        ----------------
        
        - Add a new zcml-additional option. This is useful for environments where
          non-code configuration (such as database connection details for
          ore.contentmirror) are managed through zcml.
          [wichert]
        
        3.1 (2009-03-15)
        ----------------
        
        - The 2.9 fix for spaces caused a problem using debug (bug 337740)
          due to the way do_debug passed the "-i" command line argument
          to get_startup_cmd.
          [smcmahon]
        
        3.0 (2009-02-27)
        ----------------
        
        - The 2.9 fix for the instance run command was itself broken and
          would fail on anything except Windows.
          [smcmahon]
        
        - Changed the `zope2-egg` option to omit any kind of instance creation for
          now. The mkzopeinstance script relies on being able to import Zope2, which
          is not available when buildout runs.
          [hannosch]
        
        2.9 (2009-02-26)
        ----------------
        
        - The instance run command was vulnerable to spaces in pathnames, and
          needed some extra quoting for win32.
          [smcmahon]
        
        - Check for existence of windows scripts before patching them. Some
          Linux distributions of Zope2 don't have these files.
          [smcmahon]
        
        - Delegate commands to ``win32serviceutil.HandleCommand()`` on win32,
          instead of starting the interpreter through ``os.system()``. Should
          shave off a couple seconds from overall time taken to process those
          commands.
          [sidnei]
        
        - Compute ``serviceClassString`` ourselves, since we are calling this
          as a module and not directly as ``__main__``, otherwise the service
          won't be installed correctly.
          [sidnei]
        
        2.8 (2008-12-05)
        ----------------
        
        - Add more tests for ZEO client with blob and demo storages.
          Still no test on 'shared-blob-dir' option.
          [encolpe]
        
        - Always use 'r'-style strings for passing script and configuration
          filenames (eg: on 'instance run <script>').
          [sidnei]
        
        - Add a demo-storage option and tests.
          [encolpe]
        
        - Add a first test for blob-storage.
          [encolpe]
        
        2.7 (2008-11-18)
        ----------------
        
        - Added a `zope2-egg` option and an accompanying simple startup script for
          use with an eggified Zope2.
          [hannosch]
        
        - Do not fail with a Zope2 egg checkout.
          [hannosch]
        
        - Normalize first argument to os.spawnl. It can get really upset
          otherwise (dll import failure on a relocatable python install).
          [sidnei]
        
        - Use same quoting as on 'do_foreground' for servicescript
          usage. Fixes problems with installing the buildout-based Plone
          installer for Windows on a path with spaces.
          [sidnei]
        
        - Ensure that do_foreground leaves self.options.program arguments as it
          found them.  This makes it possible to use 'fg' and 'debug' more than
          once within the same control session.
          [klm]
        
        2.6 (2008-10-22)
        ----------------
        
        - Normalize, absolutize and lowercase-ize (is that a word?) paths
          before comparing, to avoid problems with relative filenames and
          different drive letter case on Windows.
          [sidnei]
        
        2.5 (2008-09-22)
        ----------------
        
        - Add support for zodb-cache-size-bytes from ZODB 3.9 and later.
          [wichert]
        
        
        2.4 (2008-07-15)
        ----------------
        
        - Introduced zope.conf variables "INSTANCEHOME" and "CLIENTHOME".
          Its very very helpful in cluster setups with zope-conf-additional
          sections (buildout lacks to reference the current section).
          [jensens]
        
        - Made test command compatible with zope.testing 3.6.
          [hannosch]
        
        2.3.1 (2008-06-10)
        ------------------
        
        - No code changes. Released to fix the 2.3 release which put .egg files in
          the wild.
          [hannosch]
        
        2.3 (2008-06-06)
        ----------------
        
        - Need to actually pass in deprecation-warnings, otherwise we get a
          KeyError.
          [sidnei]
        
        - Fix another place where the directory name needed to be escaped to
          avoid problems with spaces.
          [sidnei]
        
        - Don't try to delete location if it does not exist.
          [sidnei]
        
        2.2 (2008-06-06)
        ----------------
        
        - Added `deprecation-warnings` option that allows turning the option
          to disable deprecation warnings on or off. You can provide the value
          `error` to it, and every deprecation warning will be turned into an
          exception.
          [sidnei]
        
        - Fix copy and paste error that caused a failure on changing
          runzope.bat to call servicewrapper.py.
          [sidnei]
        
        - Escape 'executable' argument before passing it to os.spawnl, in
          order to make it work on Windows when the executable name has spaces
          on it.
          [sidnei]
        
        - Added `http-fast-listen` option. Use of this option requires Zope >= 2.11.
          [stefan]
        
        2.1 (2008-06-05)
        ----------------
        
        - Fixed a test problem on Windows, where explicit closing of files is required.
          [hannosch]
        
        - Call `servicewrapper.py` from `runzope.bat` instead of setting
          `PYTHONPATH` and calling `Zope2/Startup/run.py`. That way we set
          sys.path from inside Python code and avoid exceeding the maximum
          environment variable limit.
          [sidnei]
        
        - Allow to use an alternative temporary storage, by specifying the new
          `zodb-temporary-storage` option.
          [jensens]
        
        - Added `environment-vars` option to set environment variables. Changed
          the zope-conf-additional example code to something that isn't covered by
          the recipe.
          [claytron]
        
        2.0 (2008-05-29)
        ----------------
        
        - Do not use system but exec when starting Zope. This makes it possible for
          process management tools to properly manage Zope processes.
          [wichert]
        
        - Added `site-zcml` option
          Added tests
          [mustapha]
        
        - Add support for ZEO authentication. Note that this does not work with any
          released Zope or ZODB version at this moment. See
          http://mail.zope.org/pipermail/zope/2005-October/161951.html for required
          patches.
          [wichert]
        
        - Added FTP and WebDAV options
          [claytron]
        
        - Allow rel-storage to be an empty string, meaning 'do not use relstorage'.
          This allows an extending buildout configuration to disable relstorage again.
          [mj]
        
        1.9 (2008-04-15)
        ----------------
        
        - Fix rel-storage parsing for options with spaces. Note that split() or
          split(None) already strips the string.
          [mj]
        
        1.8 (2008-04-05)
        ----------------
        
        - Fixed a Win32 problem in which the presence of Python string escapes in the
          path to zope.conf (e.g., d:\botest\parts\instance\etc\zope.conf would escape
          the \b). This showed up when using the 'run', 'debug' or 'adduser' commands.
          This fixes #211416.
          [smcmahon]
        
        - Added `console` command to the instance script, which is equivalent to fg but
          does not implicitly turn on debug mode but respects the zope.conf setting.
          [hannosch]
        
        1.7 (2008-03-31)
        ----------------
        
        - Added new client-home option and let it default to a subfolder of the
          buildout-wide var folder with a subfolder of the name of the section.
          [hannosch]
        
        - Added limited support for running tests under Zope <= 2.8.
          [hannosch]
        
        1.6 (2008-03-27)
        ----------------
        
        - Fixed runzope script generation for Zope 2.8.
          [hannosch]
        
        - Cleaned up "./bin/instance test" option handling.
          [stefan]
        
        - Removed generator expressions as these aren't supported in < py2.4, which is
          used by zope 2.7/8.
          [duffyd]
        
        1.5 (2008-02-29)
        ----------------
        
        - Added `access-log-custom` option to be able to use another event logger
          than the file one for the access logger.
          [tarek]
        
        - Fix instance generation to work on Windows with blanks in the path name.
          This closes #188023.
          [hannosch, gotti]
        
        - Added 'zeo-client-client' option which results in 'client <value>' inside
          <zeoclient>.
          [timte, hannosch]
        
        - Made relstorage handling more generic, so it now supports any RelStorage
          adapter, including Oracle (which was broken).
          [mj]
        
        1.4 (2008-02-23)
        ----------------
        
        - Fix typo in event log parameter name (from "z-log" to "z2-log"), to comply
          with the documentation. This closes #190943.
          [kdeldycke]
        
        - Create pid and lock file folders if they don't exist.
          [kdeldycke]
        
        - Remove hard-coded log level and use the event_log_level parameter to set it
          dynamically. This closes #190994.
          [kdeldycke]
        
        - Added a test environment, using zc.buildout.testing, and a doctest that
          tries the recipe.
          [tarek]
        
        - Added an `event-log-custom` option
          [tarek]
        
        - Added example for the zope-conf-additional option. This closes #185539.
          [klm, hannosch]
        
        - Added `rel-storage` option to be able to wire Zope to RelStorage
          (postgresql/oracle) instead of a FileStorage database.
          [tarek]
        
        1.3
        ---
        
        - For each entry in recipe-specified 'extra-paths' line, add a 'path' line
          to the instance and Zope client zope.conf files.
          [klm]
        
        1.2
        ---
        
        - Added the boolean `shared-blob` option, defaulting to `no`. If all of
          `zeo-client`, `blob-storage` and `shared-blob` options are set,
          the instance will assume the blob directory set by `blob-storage` is shared
          with the server instead of streaming 'blob' files through the ZEO connection.
          [rochael]
        
        - Changed `ctl.do_foreground()` (which is invoked by the `fg` command
          line argument) start Zope in debug mode to emulate the behavior of
          `zopectl fg`. This required a little special WIN32 code to make
          sure it would work in both `*nix` and Windows.
          [smcmahon]
        
        - Added `var` option, which is used to configure the base directory for all
          the things going into var.
          [hannosch]
        
        - Added `zeo-var` option, which is used in the zeo storage snippets to
          configure the zeo var folder.
          [hannosch]
        
        - Merged rochael-blobsupport branch. Added support for ZODB 3.8 blob storage
          configuration for ZEO clients. This references
          https://bugs.launchpad.net/collective.buildout/+bug/179113.
          [rochael, hannosch]
        
        - Added `zeo-client-name` option. Defaults to the name of the ZEO client.
          [hannosch]
        
        1.1
        ---
        
        - Small documentation update. Added link to the bugtracker.
          [hannosch]
        
        - Changed default of zope.conf option 'default-zpublisher-encoding' to 'utf-8'
          instead of Zope's default value of 'iso-8859-15'.
        
        - Have PID file's location default to '${buildout:directory}/var/${name}.pid'.
          Keeping the PID file in $INSTANCE_HOME gives trouble when buildout rebuilds
          the part.
          [nouri, mustapha]
        
        1.0
        ---
        
        - Increased 'zodb_cache_size' default value to 5000, which is more likely a
          better default these days.
          [hannosch]
        
        - Added support for 'extra-paths' as in 'zc.recipe.egg'; this is useful when
          using regular python packages for which no eggs are available (yet), i.e.
          with 'plone.recipe.distros'.
          [witsch]
        
        - Added zeo-storage option (merge branch ree-add-zeo-storage-option).
          [ree]
        
        - Avoid doubled entries to eggs specified in the buildout in 'sys.path':
          the working set ('ws') gets passed again when installing the script
          ('bin/instance'), but it is not also added to 'extra_paths'.
          [witsch]
        
        - Patching 'PYTHONPATH' in the Zope startup skripts should insert all
          additional paths (to eggs) __before__ 'SOFTWARE_HOME', because otherwise
          (newer) egg versions of components from the standard Zope distribution
          (i.e. stuff that lives in 'lib/python') cannot be used.
          [witsch]
        
        - Changed the option to suppress deprecation warnings to "--nowarn" or
          '--nowarning" to be consistent with "zopectl test".
          [witsch]
        
        - Added option "-w" to allow the test runner to suppress deprecation warnings,
          so it's easier to spot failing tests...
          [witsch]
        
        - Updated import for Zope 2.7 (and below) compatibility.
          [duffyd]
        
        - Merging -r51966:52659 claytron-zopeconfoptions branch to trunk.
          [claytron]
        
        - Made the config snippet prettier while still getting the resulting
          indentation right.
          [witsch]
        
        0.9
        ---
        
        - Added support for zodb 3.8's "<blobstorage>" directive.
          [witsch]
        
        - Added a script name arg before callint zope.testing.testrunner.run.
          zope.testing.testrunner:1772, get_options removes the first arg from
          the list of arguments expecting a script name there. Was causing
          "bin/instance test" to behave improperly.
          [rossp]
        
        0.8
        ---
        
        - Use bin if present falling back to utilities. This makes it possible to use
          a Zope version installed from a tarball and not compiled inplace.
          [rossp]
        
        0.7
        ---
        
        - Found the problem with strange environment variables.
          [hannosch]
        
        - Fixed documentation bug, the cache size is respected by non-zeo instance as
          well.
          [hannosch]
        
        0.6
        ---
        
        - J1m actually read the docs ;)
          [hannosch]
        
        - Attempt to fix the sometimes insane number of tests which are found by the
          test runner.
          [hannosch]
        
        0.5
        ---
        
        - Added an option to set the effective-user.
          [optilude]
        
        0.4
        ---
        
        - Generate a bin/repozo script to perform backups using repozo.py (and
          set up the appropriate pythonpath for this to work).
          [optilude]
        
        - Document options properly, and add the ability to specify a zope.conf
          file explicitly rather than having one generated from a template.
          [optilude]
        
        0.3
        ---
        
        - Finally found a way to provide the Zope Windows service with the right
          environment. We need a new wrapper script, which sets up the PYTHONPATH.
          [hannosch]
        
        - Make it possible to configure the name of the zopectl script using the
          control-script option in the [instance] section.
          [wichert]
        
        0.2
        ---
        
        - Extend support for zcml slugs to include Zope 2.9.
          [dunny]
        
        - Added support for making a ZEO-client.
          [regebro]
        
        0.1
        ---
        
        - Initial implementation.
          [hannosch]
        
Keywords: zope2 buildout
Platform: UNKNOWN
Classifier: License :: OSI Approved :: Zope Public License
Classifier: Framework :: Buildout
Classifier: Framework :: Plone
Classifier: Framework :: Zope2
